Home › General › MAINTENANCE › AIR CONDITIONING FILTER
RM33C0E _V1 General _065432 MAINTENANCE _0321816 AIR CONDITIONING FILTER A

MAINTENANCE  AIR CONDITIONING FILTER  INSTALLATION  


PROCEDURE

Hide 87139C 1.INSTALL CLEAN AIR FILTER

a.

w/o Case:

i.
E405247C01
0,0 0,0 false
V113147

Install in this Direction


Install the clean air filter as shown in the illustration.

NOTICE:

Make sure that the "UP" mark are facing the correct direction before installing the clean air filter.




b.

w/ Case:

i.

Engage the 2 guides on the cutout side of the air filter case and then engage the 2 guides as shown in the illustration to install the clean air filter.

E363880C01
4.688,2.688 4.688,2.073 true 2.146,4.281 2.563,3.865 false 4.604,2.698 4.917,2.854 0.313,0.156 10 false *a 2.573,3.75 2.885,3.906 0.313,0.156 10 false *b
*a Cutout *b Rib
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


NOTICE:
·

Make sure that the "UP" marks are facing the correct direction before installing the clean air filter.

·

Make sure that there is no clearance between the clean air filter and air filter case and that the clean air filter is not deformed.




ii.
E372073C01
0,0 0,0 false
V113147

Install in this Direction


Install the air filter sub-assembly as shown in the illustration.

NOTICE:

Make sure that the "UP" mark is facing the correct direction before installing the air filter sub-assembly.




Hide 88899M 2.INSTALL AIR FILTER COVER PLATE

a.
E372074C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the 2 guides and claw as indicated by the arrows, in the order shown in the illustration to install the air filter cover plate.


Hide 3.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for Type A)

a.
E372075C01
0.552,1.146 0.865,1.302 0.313,0.156 10 false *a
*a 60°
V113147

Install in this Direction


With the glove compartment door assembly opened approximately 60° from its closed position, engage the 2 hinges horizontally.

NOTICE:

Engaging the hinges from an upward angle will deform the hinges. Be sure to install the glove compartment door assembly horizontally.



b.
E372076C01
2.094,2.75 2.365,2.75 false 2.948,0.406 3.167,0.229 false 2.385,2.656 2.698,2.813 0.313,0.156 10 false *1 3.188,0.094 3.427,0.271 0.24,0.177 10 false *a 0.833,1.198 1.042,1.396 0.208,0.198 10 true B 3.198,1.208 3.406,1.406 0.208,0.198 10 true A
*1 Glove Compartment Door Stopper Sub-assembly
*a Stopper


Slightly bend the stoppers (A) and (B) in the directions indicated by the arrows shown in the illustration and engage the stoppers to install the glove compartment door assembly.


c.

Engage the claw to connect the glove compartment door stopper sub-assembly.


Hide 55459D 4.INSTALL LOWER INSTRUMENT COVER LH (for Type B)

a.
E365794C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and claw to install the lower instrument cover LH as shown in the illustration.