Home › Engine / Hybrid System › A25A-FXS (EMISSION CONTROL) › FUEL VAPOR CONTAINMENT VALVE(w/ Canister Pump Module)
RM33C0E _51 Engine / Hybrid System _065422 A25A-FXS EMISSION CONTROL _0322969 FUEL VAPOR CONTAINMENT VALVE(w/ Canister Pump Module) A

A25A-FXS EMISSION CONTROL  FUEL VAPOR CONTAINMENT VALVE(w/ Canister Pump Module)  INSTALLATION  


PROCEDURE

Hide 77710B 1.INSTALL FUEL VAPOR CONTAINMENT VALVE (FUEL TANK SOLENOID MAIN VALVE ASSEMBLY)

a.

Install the fuel vapor containment valve (fuel tank solenoid main valve assembly) to the vehicle body with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.
A405802C01
1.948,2.76 2.302,2.76 true 2.313,2.667 2.542,2.854 0.229,0.188 10 false *a
*a Retainer
V100135

Push in


Push the fuel tank vent hose onto the fuel vapor containment valve (fuel tank solenoid main valve assembly) and push in the retainer to engage the lock claws.

NOTICE:
·

Check that there are no scratches or foreign matter around the connecting parts of the fuel tank vent hose and fuel vapor containment valve (fuel tank solenoid main valve assembly) before performing this work.

·

After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling on the fuel tank vent hose.




c.

Connect the fuel vapor containment valve (fuel tank solenoid main valve assembly) connector.


d.
A405803C01
1.948,2.76 2.333,2.76 true 2.344,2.667 2.542,2.844 0.198,0.177 10 false *a
*a Retainer
V100135

Push in


Push the fuel tank vent hose sub-assembly onto the fuel vapor containment valve (fuel tank solenoid main valve assembly) and push in the retainer to engage the lock claws.

NOTICE:
·

Check that there are no scratches or foreign matter around the connecting parts of the fuel tank vent hose sub-assembly and fuel vapor containment valve (fuel tank solenoid main valve assembly) before performing this work.

·

After connecting the fuel tank vent hose sub-assembly, check that the fuel tank vent hose sub-assembly is securely connected by pulling on the fuel tank vent hose sub-assembly.