Home › Engine / Hybrid System › A25A-FXS (EMISSION CONTROL) › FUEL VAPOR CONTAINMENT VALVE(w/ Canister Pump Module)
RM33C0E _51 Engine / Hybrid System _065422 A25A-FXS EMISSION CONTROL _0322969 FUEL VAPOR CONTAINMENT VALVE(w/ Canister Pump Module) A

A25A-FXS EMISSION CONTROL  FUEL VAPOR CONTAINMENT VALVE(w/ Canister Pump Module)  REMOVAL  


PROCEDURE

Hide 77710B 1.REMOVE FUEL VAPOR CONTAINMENT VALVE (FUEL TANK SOLENOID MAIN VALVE ASSEMBLY)

a.
A405798

Disconnect the fuel vapor containment valve (fuel tank solenoid main valve assembly) connector.


b.

Disconnect the fuel tank vent hose sub-assembly from the fuel vapor containment valve (fuel tank solenoid main valve assembly).

A405799C01
2.01,1.208 2.396,1.208 true 5.615,2.375 5.615,1.885 true 6.042,2.521 6.042,2.031 true 6.292,1.313 6.385,0.896 6.385,0.896 6.542,0.896 true 5.417,1.25 5.271,0.875 5.271,0.875 5.031,0.875 true 2.177,1.958 1.99,2.188 1.99,2.188 1.813,2.188 true 2.865,2.292 2.563,2.292 true 2.417,1.135 2.594,1.302 0.177,0.167 10 true *1 6.583,0.823 6.823,1.01 0.24,0.188 10 false *2 5.958,2.542 6.167,2.719 0.208,0.177 10 false *a 1.656,2.115 1.854,2.292 0.198,0.177 10 false *b 4.865,0.792 5.073,0.969 0.208,0.177 10 false *c 5.542,2.396 5.76,2.583 0.219,0.188 10 false *d 2.896,2.219 3.104,2.396 0.208,0.177 10 false *a
*1 Fuel Tank Vent Hose Sub-assembly *2 Pipe (Fuel Vapor Containment Valve (Fuel Tank Solenoid Main Valve Assembly))
*a Retainer *b Tab
*c Tube Connector *d O-ring
V100135

Pinch
V100136

Pull
V100137

Pull off - -


NOTICE:
·

Remove any dirt or foreign matter on the tube connectors before performing this work.

·

Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the tube connectors has an O-ring that seals the pipe (fuel vapor containment valve (fuel tank solenoid main valve assembly)).

·

Perform this work by hand. Do not use any tools.

·

Do not forcibly bend, twist or turn the fuel tank vent hose sub-assembly.

·

Protect the disconnected parts by covering them with plastic bags after disconnecting the fuel tank vent hose sub-assembly.

·

If the tube connector and pipe (fuel vapor containment valve (fuel tank solenoid main valve assembly)) are stuck, push and pull to release them.



HINT:

Do not remove the retainer.


i.

Pinch the tabs of the retainer to disengage the lock claws and pull it down.


ii.

Pull off the fuel tank vent hose sub-assembly.



c.

Disconnect the fuel tank vent hose from the fuel vapor containment valve (fuel tank solenoid main valve assembly).

A405800C01
0.958,2.167 1.063,2.167 1.063,2.167 1.177,1.99 true 1.219,0.906 1.406,0.906 1.406,0.906 1.615,1.01 true 1.573,2.292 1.875,2.292 true 5.115,1.094 5.302,1.094 5.302,1.094 5.417,1.333 true 6.604,1.073 6.427,1.073 6.427,1.073 6.313,1.396 true 6.042,2.104 6.042,2.458 true 5.615,1.948 5.615,2.302 true 1.052,0.823 1.25,1.01 0.198,0.188 10 true *1 6.635,0.99 6.833,1.177 0.198,0.188 10 false *2 5.979,2.448 6.208,2.656 0.229,0.208 10 false *a 0.802,2.073 1.01,2.25 0.208,0.177 10 false *b 4.948,1 5.156,1.188 0.208,0.188 10 false *c 5.542,2.323 5.76,2.51 0.219,0.188 10 false *d 1.896,2.188 2.125,2.396 0.229,0.208 10 false *a
*1 Fuel Tank Vent Hose *2 Pipe (Fuel Vapor Containment Valve (Fuel Tank Solenoid Main Valve Assembly))
*a Retainer *b Tab
*c Tube Connector *d O-ring
V100135

Pinch
V100136

Pull
V100137

Pull off - -


NOTICE:
·

Remove any dirt or foreign matter on the tube connectors before performing this work.

·

Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the tube connectors has an O-ring that seals the pipe (fuel vapor containment valve (fuel tank solenoid main valve assembly)).

·

Perform this work by hand. Do not use any tools.

·

Do not forcibly bend, twist or turn the fuel tank vent hose.

·

Protect the disconnected parts by covering them with plastic bags after disconnecting the fuel tank vent hose.

·

If the tube connector and pipe (fuel vapor containment valve (fuel tank solenoid main valve assembly)) are stuck, push and pull to release them.



HINT:

Do not remove the retainer.


i.

Pinch the tabs of the retainer to disengage the lock claws and pull it down.


ii.

Pull off the fuel tank vent hose.



d.
A405801

Remove the 2 nuts and fuel vapor containment valve (fuel tank solenoid main valve assembly) from the vehicle body.