Home › Engine / Hybrid System › A25A-FXS (EMISSION CONTROL) › FUEL TANK CAP(w/ Canister Pump Module)
RM33C0E _51 Engine / Hybrid System _065422 A25A-FXS EMISSION CONTROL _0322971 FUEL TANK CAP(w/ Canister Pump Module) G

A25A-FXS EMISSION CONTROL  FUEL TANK CAP(w/ Canister Pump Module)  INSPECTION  


PROCEDURE

Hide 77310A 1.INSPECT FUEL TANK CAP ASSEMBLY

a.
A310388C01
2.417,1.26 2.719,1.604 2.719,1.604 2.875,1.604 false 2.969,1.51 3.281,1.708 0.313,0.198 10 false *a
*a Gasket


Visually check that the fuel tank cap assembly and gasket are not deformed or damaged.

If the result is not as specified, replace the fuel tank cap assembly.


b.
A408294C01
1.865,1.792 2.688,1.792 true 2.719,1.698 2.969,1.927 0.25,0.229 10 false *a
*a ID Mark


Confirm that ID mark Z is printed on the fuel tank cap assembly.

CAUTION:

Make sure to use a fuel tank cap assembly that has the same ID mark, or a malfunction may occur in the fuel system.