Home › Engine / Hybrid System › A25A-FXS (EMISSION CONTROL) › PURGE VALVE
RM33C0E _51 Engine / Hybrid System _065422 A25A-FXS EMISSION CONTROL _0322976 PURGE VALVE A

A25A-FXS EMISSION CONTROL  PURGE VALVE  INSTALLATION  


PROCEDURE

Hide 25860 1.INSTALL PURGE VALVE (PURGE VSV)

a.
A405796C01
0.948,0.76 1.125,0.76 1.125,0.76 1.281,0.948 true 2.052,1.042 2.135,0.813 2.135,0.813 2.313,0.813 true 1.854,1.719 1.938,1.927 1.938,1.927 2.115,1.927 true 2.313,0.75 2.552,0.927 0.24,0.177 10 true *1 2.146,1.854 2.354,2.052 0.208,0.198 10 true *2 0.75,0.708 0.979,0.906 0.229,0.198 10 true *3
*1 No. 1 Fuel Vapor Feed Hose
*2 No. 2 Fuel Vapor Feed Hose
*3 Purge Valve (Purge VSV)


Install the purge valve (purge VSV) to the purge VSV bracket with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV).


c.

Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV).


d.

Connect the purge valve (purge VSV) connector.