Home › Engine / Hybrid System › A25A-FXS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM33C0E _51 Engine / Hybrid System _065419 A25A-FXS ENGINE CONTROL _0326941 CAMSHAFT OIL CONTROL VALVE G

A25A-FXS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15370 1.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

Hide 135A0A 2.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY)

a.
A471290C01
1.802,1.844 1.802,1.302 true 1.729,4.125 1.729,3.583 true 0.052,0.042 0.51,0.396 0.458,0.354 12 false *A 0.052,2.406 0.406,2.698 0.354,0.292 12 false *B 1.74,1.854 1.948,2.052 0.208,0.198 10 true *a 1.667,4.135 1.875,4.333 0.208,0.198 10 true *a
*A Type A
*B Type B
*a Plunger


Check the stroke of the plunger in the center of the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).

Standard Stroke:

2.2 mm (0.0866 in.) or more


If the result is not as specified, replace the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).


Hide 15370 3.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY