Home › Engine / Hybrid System › A25A-FXS (ENGINE CONTROL) › AIR FUEL RATIO SENSOR (for Sensor 2)
RM33C0E _51 Engine / Hybrid System _065419 A25A-FXS ENGINE CONTROL _0326954 AIR FUEL RATIO SENSOR(for Sensor 2) G

A25A-FXS ENGINE CONTROL  AIR FUEL RATIO SENSOR(for Sensor 2)  INSPECTION  


PROCEDURE

Hide 89467C 1.INSPECT AIR FUEL RATIO SENSOR

a.
A401882C01
0.896,1.01 1.354,1.01 true 0.896,1.354 1.354,1.354 true 2.125,1 2.583,1 true 0.073,0.083 0.469,0.333 0.396,0.25 10 false *a 0.677,0.917 1.073,1.167 0.396,0.25 10 false +B 0.521,1.26 1.094,1.51 0.573,0.25 10 false A1B- 2.635,0.906 3.135,1.146 0.5,0.24 10 false HA1B
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1B) - 2 (+B) 20°C (68°F) 2 to 6 Ω
1 (HA1B) - 4 (A1B-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.