Home › Vehicle Exterior › HORN › RELAY
RM33C0E _59 Vehicle Exterior _065473 HORN _0327507 RELAY G

HORN  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 86530 1.INSPECT HORN RELAY

E273663N01
2.052,0.771 2.313,0.771 false 2.885,0.771 3.115,0.771 false 2.771,1.125 3.115,1.125 false 2.792,1.563 3.115,1.563 false 1.927,0.688 2.083,0.885 0.156,0.198 10 false 1 3.188,0.698 3.344,0.896 0.156,0.198 10 false 2 3.198,1.052 3.354,1.25 0.156,0.198 10 false 5 3.198,1.49 3.354,1.688 0.156,0.198 10 false 3

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the HORN relay.