Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF HOUSING (for Panoramic Moon Roof)
RM33C0E _59 Vehicle Exterior _065468 SLIDING ROOF / CONVERTIBLE _0328286 SLIDING ROOF HOUSING(for Panoramic Moon Roof) A

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF HOUSING(for Panoramic Moon Roof)  DISASSEMBLY  


PROCEDURE

Hide 63218M 1.REMOVE NO. 1 SLIDING ROOF SIDE GARNISH LH

a.

Using a heat light, heat the No. 1 sliding roof side garnish LH.

Heating Temperature
Item Temperature
No. 1 Sliding Roof Side Garnish LH 20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the No. 1 sliding roof side garnish LH excessively.



b.

Disengage the 28 claws and 2 guides to remove the No. 1 sliding roof side garnish LH.

B481860C01
0,0 0,0 false
V100155

Double-sided Tape - -



Hide 63217K 2.REMOVE NO. 1 SLIDING ROOF SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 63209 3.REMOVE ROOF WIND DEFLECTOR PANEL SUB-ASSEMBLY

a.

Disengage the 3 claws.

B481864C01
0.667,2.125 0.854,2 true 6.302,1.781 6.542,1.958 true 2.25,1.594 2.583,1.594 true 4.729,2.083 5,2.083 true 4.635,2.5 4.896,2.635 true 2.469,1.823 2.729,1.958 true 0.865,1.875 1.073,2.052 0.208,0.177 10 true *c 6.083,1.677 6.292,1.854 0.208,0.177 10 true *c 2.073,1.5 2.385,1.698 0.313,0.198 10 false *a 5.031,1.979 5.344,2.177 0.313,0.198 10 false *a 2.76,1.875 3.073,2.073 0.313,0.198 10 false *b 4.927,2.552 5.24,2.75 0.313,0.198 10 false *b
*a Pin (A) *b Pin (B)
*c Protective Tape - -



b.

Disengage the 2 pins (A).


c.

Using a screwdriver with its tip wrapped with protective tape, disengage the 2 pins (B) to remove the roof wind deflector panel sub-assembly.


Hide 82172 4.REMOVE NO. 2 ROOF WIRE

a.

Disconnect the 3 connectors.

B481844


b.

Disengage the 16 clamps to remove the No. 2 roof wire.


Hide 63260J 5.REMOVE SLIDING ROOF DRIVE GEAR ASSEMBLY (for Sliding Roof Glass)

a.
B481845

Remove the 2 bolts and sliding roof drive gear assembly.


Hide 63260K 6.REMOVE SLIDING ROOF DRIVE GEAR ASSEMBLY (for Roof Sunshade)

a.
B481846

Remove the 2 bolts and sliding roof drive gear assembly.


Hide 63219A 7.REMOVE REAR SLIDING ROOF GARNISH

a.

Using a heat light, heat the rear sliding roof garnish.

Heating Temperature
Item Temperature
Rear Sliding Roof Garnish 20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the rear sliding roof garnish excessively.



b.

Disengage the 3 fasteners and 3 guides to remove the rear sliding roof garnish.

B481847C01
3.719,0.865 3.958,0.865 true 3.333,1.021 3.573,1.021 true 3.74,1.385 3.979,1.385 true 3.76,1.75 4,1.75 true 3.344,1.573 3.583,1.573 true 3.344,1.292 3.583,1.292 true 3.344,0.667 3.583,0.667 true 3.75,0.542 3.99,0.542 true 3.729,0.677 3.969,0.677 true 3.76,1.969 4,1.969 true 3.354,1.979 3.594,1.979 true 3.76,2.146 4,2.146 true 3.146,0.917 3.458,1.073 0.313,0.156 10 false *a 3.979,0.781 4.292,0.938 0.313,0.156 10 false *b 4.01,1.292 4.323,1.448 0.313,0.156 10 false *b 3.146,1.188 3.458,1.344 0.313,0.156 10 false *a 3.135,1.469 3.448,1.625 0.313,0.156 10 false *a 4.021,1.656 4.333,1.813 0.313,0.156 10 false *b 3.146,0.594 3.458,0.75 0.313,0.156 10 false *c 4.021,0.438 4.333,0.594 0.313,0.156 10 false *c 4,0.594 4.313,0.75 0.313,0.156 10 false *c 4.021,1.885 4.333,2.042 0.313,0.156 10 false *c 3.167,1.885 3.479,2.042 0.313,0.156 10 false *c 4.021,2.063 4.333,2.219 0.313,0.156 10 false *c
*a Fastener *b Guide
*c Double-sided Tape - -



Hide 63231C 8.REMOVE ROOM LIGHT BRACKET

a.
B481848

Remove the 2 nuts and room light bracket.


Hide 63202H 9.REMOVE SLIDE ROOF RAIL SUB-ASSEMBLY

a.

Remove the 42 nuts and slide roof rail sub-assembly from the sliding roof housing panel.

B481849


Hide 63306 10.REMOVE SUNSHADE TRIM SUB-ASSEMBLY

a.
B481850C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claw to remove the sliding roof sunshade guide RH as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



b.
B481851C01
0.885,1.521 0.885,0.792 true 0.792,1.552 1.104,1.75 0.313,0.198 10 false *a
*a Portion A
V113147

Remove in this Direction


Move the portion (A) as shown in the illustration to disengage the claw.

HINT:

Use the same procedure for the RH side and LH side.



c.
B481852C01
1.333,0.792 2.219,0.281 true 2.25,0.188 2.563,0.344 0.313,0.156 10 false *1
*1 Sliding Roof Guide Rail Sub-assembly RH
V113147

Remove in this Direction


Slide the sliding roof sunshade runner and sunshade trim sub-assembly as shown in the illustration to separate them from the sliding roof guide rail sub-assembly RH.

HINT:

Use the same procedure for the RH side and LH side.



d.
B481853C01
0.938,1.417 0.938,0.865 true 0.313,0.125 0.625,0.281 0.313,0.156 12 false *A 0.865,1.448 1.177,1.604 0.313,0.156 10 false *a
*A RH Side
*a Retractor Cap
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Remove the sunshade trim sub-assembly as shown in the illustration.

NOTICE:

To prevent the sunshade trim sub-assembly from being damaged, fully push in the RH side retractor cap before lifting the sunshade trim sub-assembly to separate it from the slide roof rail sub-assembly.


HINT:

Separate the RH side first.