Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SWITCH ASSEMBLY
RM33C0E _59 Vehicle Exterior _065468 SLIDING ROOF / CONVERTIBLE _0328288 SLIDING ROOF SWITCH ASSEMBLY G

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SWITCH ASSEMBLY  INSPECTION  


PROCEDURE

Hide 63605B 1.INSPECT SLIDING ROOF SWITCH (ROOF CONSOLE BOX SUB-ASSEMBLY)

a.
B454515C02
1.292,1.833 1.292,0.531 1.292,0.531 1.042,0.531 false 2.167,1.823 2.167,0.521 2.167,0.521 2.417,0.521 false 0.521,3.135 0.833,3.333 0.313,0.198 10 false *a 0.875,0.427 1.156,0.698 0.281,0.271 10 false *b 2.469,0.448 2.75,0.719 0.281,0.271 10 false *c
*a Component without harness connected
(Sliding Roof Switch (Roof Console Box Sub-assembly))
*b Sliding Roof Switch
*c Tilt Switch


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 15 UP switch pressed Below 100 Ω
3 - 15 UP switch not pressed 1 kΩ or higher
18 - 15 DOWN switch pressed Below 100 Ω
18 - 15 DOWN switch not pressed 1 kΩ or higher
5 - 15 OPEN switch pressed Below 100 Ω
5 - 15 OPEN switch not pressed 1 kΩ or higher
4 - 15 CLOSE switch pressed Below 100 Ω
4 - 15 CLOSE switch not pressed 1 kΩ or higher


If the result is not as specified, replace the sliding roof switch (roof console box sub-assembly).


Hide 63605B 2.INSPECT PANORAMIC MOON ROOF SWITCH (ROOF CONSOLE BOX SUB-ASSEMBLY)

a.
B454547C04
1.25,1.802 1.25,0.417 1.25,0.417 1.083,0.417 false 1.25,1.802 1.25,0.417 1.25,0.417 1.083,0.417 true 2.167,1.802 2.167,0.417 2.167,0.417 2.333,0.417 true 2.198,1.969 2.948,1.969 true 0.344,2.948 0.656,3.146 0.313,0.198 10 false *a 2.396,0.365 2.719,0.635 0.323,0.271 10 false *b 3.01,1.896 3.281,2.188 0.271,0.292 10 false *c 0.896,0.344 1.115,0.594 0.219,0.25 10 false *d
*a Component without harness connected
(Panoramic Moon Roof Switch (Roof Console Box Sub-assembly))
*b Sliding Roof Switch
*c Tilt Switch
*d Roof Sunshade Switch


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
5 - 15 Sliding roof switch slid backward Below 100 Ω
5 - 15 Sliding roof switch not slid backward 1 kΩ or higher
4 - 15 Sliding roof switch slid forward Below 100 Ω
4 - 15 Sliding roof switch not slid forward 1 kΩ or higher
19 - 15 Tilt switch pressed Below 100 Ω
19 - 15 Tilt switch not pressed 1 kΩ or higher
3 - 15 Roof sunshade switch slid backward Below 100 Ω
3 - 15 Roof sunshade switch not slid backward 1 kΩ or higher
18 - 15 Roof sunshade switch slid forward Below 100 Ω
18 - 15 Roof sunshade switch not slid forward 1 kΩ or higher


If the result is not as specified, replace the panoramic moon roof switch (roof console box sub-assembly).