Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE
RM33C0E _59 Vehicle Exterior _065474 EXTERIOR PANELS / TRIM _0328325 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

When removing the name plates or luggage compartment door emblem, heat the luggage compartment door panel and name plates or luggage compartment door emblem using a heat light.


Heating Temperature
Item Temperature
Luggage Compartment Door Panel 40 to 60°C (104 to 140°F)
Name Plate or Luggage Compartment Door Emblem 20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the luggage compartment door panel, name plates or luggage compartment door emblem excessively.


PROCEDURE

Hide 75431 1.REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM

a.
B470922C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the luggage compartment door emblem as shown in the illustration.


b.

Using a moulding remover, separate the double-sided tape and disengage the 2 pins to remove the luggage compartment door emblem.

NOTICE:

Be careful not to damage the luggage compartment door panel.



Hide 75442 2.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

a.
B470923C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the No. 2 luggage compartment door name plate as shown in the illustration.


b.

Using a moulding remover, separate the double-sided tape and disengage the 10 pins to remove the No. 2 luggage compartment door name plate as shown in the illustration.

NOTICE:

Be careful not to damage the luggage compartment door panel.



Hide 75447 3.REMOVE NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE

a.
B483738C01
3.063,0.656 2.885,0.531 true 2.479,0.885 1.896,0.667 true 3.083,0.531 3.313,0.74 0.229,0.208 10 true *a 2.521,0.792 2.74,0.99 0.219,0.198 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 7 luggage compartment door name plate as shown in the illustration.


b.

Insert a piano wire between the luggage compartment door panel and No. 7 luggage compartment door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 7 luggage compartment door name plate to the luggage compartment door panel.

NOTICE:

Be careful not to damage the luggage compartment door panel.



e.

Remove the No. 7 luggage compartment door name plate.


Hide 75441A 4.REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE

a.
B485325C01
2.958,0.927 2.958,0.719 true 2.479,0.906 1.99,0.76 true 2.906,0.917 3.115,1.125 0.208,0.208 10 true *a 2.521,0.823 2.729,1.021 0.208,0.198 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 1 luggage compartment door name plate as shown in the illustration.


b.

Insert a piano wire between the luggage compartment door panel and No. 1 luggage compartment door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 1 luggage compartment door name plate to the luggage compartment door panel.

NOTICE:

Be careful not to damage the luggage compartment door panel.



e.

Remove the No. 1 luggage compartment door name plate.


Hide 75374 5.REMOVE SIDE PANEL EMBLEM

HINT:

Use the same procedure for the RH side and LH side.


a.
B481980C01
2.854,0.583 2.646,0.583 true 2.604,0.906 1.719,0.729 true 2.875,0.479 3.073,0.656 0.198,0.177 10 true *a 2.625,0.823 2.802,1.01 0.177,0.188 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the side panel emblem as shown in the illustration.


b.

Insert a piano wire between the side panel emblem.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the side panel.

NOTICE:

Be careful not to damage the side panel.



e.

Remove the side panel emblem.