When installing the name plates or luggage compartment door emblem, heat the luggage compartment door panel and name plates or luggage compartment door emblem using a heat light.
| Item | Temperature |
|---|---|
| Luggage Compartment Door Panel | 40 to 60°C (104 to 140°F) |
| Name Plate or Luggage Compartment Door Emblem | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the luggage compartment door panel, name plates or luggage compartment door emblem excessively.
75442
1.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any remaining double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the luggage compartment door panel and a new No. 2 luggage compartment door name plate.
Remove the release paper from the No. 2 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Engage the 10 pins and install the No. 2 luggage compartment door name plate as shown in the illustration.
Press the No. 2 luggage compartment door name plate firmly to install it.
75431
2.INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any remaining double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the luggage compartment door panel and a new luggage compartment door emblem.
Remove the release paper from the luggage compartment door emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.
Press the luggage compartment door emblem firmly to install it.
75441A
3.INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any remaining double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the luggage compartment door panel and a new No. 1 luggage compartment door name plate.
Remove the release paper from the No. 1 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 luggage compartment door name plate as shown in the illustration.
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 24.4 mm (0.961 in.) | B | 12.4 mm (0.488 in.) |
| C | 7.9 mm (0.311 in.) | - | - |
Press the No. 1 luggage compartment door name plate firmly to install it.
75447
4.INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any remaining double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the luggage compartment door panel and a new No. 7 luggage compartment door name plate.
Remove the release paper from the No. 7 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 7 luggage compartment door name plate as shown in the illustration.
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 8.7 mm (0.343 in.) | B | 13.9 mm (0.547 in.) |
| C | 24.1 mm (0.949 in.) | - | - |
Press the No. 7 luggage compartment door name plate firmly to install it.
75374
5.INSTALL SIDE PANEL EMBLEM
Clean the side panel surface.
Using a heat light, heat the side panel surface.
Remove any remaining double-sided tape from the side panel.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the side panel and a new side panel emblem.
Remove the release paper from the side panel emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the side panel emblem as shown in the illustration.
for LH Side:
| *a | Profile of Side Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 153.7 mm (6.05 in.) | B | 32.2 mm (1.27 in.) |
| C | 30.9 mm (1.22 in.) | - | - |
Press the side panel emblem firmly to install it.
for RH Side:
| *a | Profile of Side Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 32.2 mm (1.27 in.) | B | 30.9 mm (1.22 in.) |
| C | 153.8 mm (6.06 in.) | - | - |
Press the side panel emblem firmly to install it.