Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM
RM33C0E _54 Brake _065442 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0328411 ELECTRONICALLY CONTROLLED BRAKE SYSTEM D

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM  DTC CHECK / CLEAR  


DTC CHECK/CLEAR


a.

Check for DTCs.

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Read the DTCs following the prompts on the GTS screen. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

Chassis > ABS/VSC/TRC > Trouble Codes
50001 105



b.

Clear the DTCs.

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.


v.

Press the DTC clear button.

Chassis > ABS/VSC/TRC > Clear DTCs
50002 105



END OF DTC CHECK/CLEAR


a.

Turn the power switch on (IG).


b.

Check that the ABS warning, brake warning / yellow (minor malfunction), slip indicator and brake hold operated indicator* lights go off when the power switch is turned on (READY).

*: The brake hold switch (electric parking brake switch assembly) is turned on under the following vehicle conditions.

Vehicle Conditions:

(1)

The driver side door is closed.

(2)

The driver side seat belt is fastened.