When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (brake booster with master cylinder assembly) operates the stop light switch assembly (stop light control relay) to illuminate the stop lights.
If the hybrid vehicle control ECU assembly receives a stop light control relay malfunction signal from the skid control ECU (brake booster with master cylinder assembly), DTC P057113 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P057113 | Brake Switch "A" Circuit Open | While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, the hybrid vehicle control ECU assembly detects the stop light control relay malfunction signal from the skid control ECU (brake booster with master cylinder assembly) for approximately 0.5 seconds or more. | Pre-collision system |
When DTC P057113 is stored by the dynamic radar cruise control system, DTC C1A4B is stored by the pre-collision system. Therefore, if DTC P057113 is stored, inspect the pre-collision system first.
NEXT