Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › COMBINATION SWITCH
RM33C0E _51 Engine / Hybrid System _065433 HYBRID / BATTERY CONTROL _0328997 COMBINATION SWITCH G

HYBRID / BATTERY CONTROL  COMBINATION SWITCH  INSPECTION  


PROCEDURE

Hide 84390B 1.INSPECT ELECTRIC PARKING BRAKE SWITCH ASSEMBLY (for LHD)

a.

Inspect EV mode switch (electric parking brake switch assembly)

i.
C307484C38
1.479,0.219 1.906,0.469 0.427,0.25 1.156,1.427 1.031,1.771 true 1.677,1.781 1.5,1.417 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *a 1.656,1.813 2.229,2.021 0.573,0.208 10 false S 0.906,1.802 1.469,2 0.563,0.198 10 false GND1 1.563,0.26 2.021,0.458 0.458,0.198 10 false K37
*a Component without harness connected
(EV Mode Switch (Electric Parking Brake Switch Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K37-14 (S) - K37-16 (GND1) EV mode switch (electric parking brake switch assembly) being pushed and held Below 1 Ω
EV mode switch (electric parking brake switch assembly) not pushed 10 kΩ or higher


If the result is not as specified, replace the EV mode switch (electric parking brake switch assembly).



b.

Inspect NORMAL mode switch (electric parking brake switch assembly)

i.
C307484C36
1.49,0.229 1.906,0.49 0.417,0.26 1.188,1.417 1.063,1.844 true 1.854,1.844 1.635,1.417 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *a 1.833,1.875 1.99,2.021 0.156,0.146 10 false B 0.938,1.865 1.5,2.063 0.563,0.198 10 false GND1 1.583,0.271 2.042,0.469 0.458,0.198 10 false K37
*a Component without harness connected
(NORMAL Mode Switch (Electric Parking Brake Switch Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K37-13 (B) - K37-16 (GND1) NORMAL mode switch (electric parking brake switch assembly) being pushed and held Below 1 Ω
NORMAL mode switch (electric parking brake switch assembly) not pushed 10 kΩ or higher


If the result is not as specified, replace the NORMAL mode switch (electric parking brake switch assembly).



c.

Inspect SPORT mode switch (electric parking brake switch assembly)

i.
C307484C37
1.479,0.313 1.906,0.563 0.427,0.25 1.177,1.417 1.042,1.771 true 1.958,1.76 1.781,1.417 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *a 1.938,1.792 2.51,2 0.573,0.208 10 false P 0.906,1.792 1.469,1.99 0.563,0.198 10 false GND1 1.563,0.354 2.021,0.552 0.458,0.198 10 false K37
*a Component without harness connected
(SPORT Mode Switch (Electric Parking Brake Switch Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K37-12 (P) - K37-16 (GND1) SPORT mode switch (electric parking brake switch assembly) being pushed and held Below 1 Ω
SPORT mode switch (electric parking brake switch assembly) not pushed 10 kΩ or higher


If the result is not as specified, replace the SPORT mode switch (electric parking brake switch assembly).



Hide 84390B 2.INSPECT ELECTRIC PARKING BRAKE SWITCH ASSEMBLY (for RHD)

a.

Inspect EV mode switch (electric parking brake switch assembly)

i.
C307484C42
1.479,0.219 1.906,0.469 0.427,0.25 1.917,1.427 1.792,1.771 true 2.406,1.781 2.229,1.417 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *a 1.75,1.802 2.323,2.01 0.573,0.208 10 false S 2.25,1.802 2.813,2 0.563,0.198 10 false GND1 1.563,0.26 2.021,0.458 0.458,0.198 10 false K37
*a Component without harness connected
(EV Mode Switch (Electric Parking Brake Switch Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K37-11 (S) - K37-9 (GND1) EV mode switch (electric parking brake switch assembly) being pushed and held Below 1 Ω
EV mode switch (electric parking brake switch assembly) not pushed 10 kΩ or higher


If the result is not as specified, replace the EV mode switch (electric parking brake switch assembly).



b.

Inspect NORMAL mode switch (electric parking brake switch assembly)

i.
C307484C43
1.479,0.219 1.906,0.469 0.427,0.25 1.771,1.427 1.646,1.771 true 2.396,1.781 2.219,1.417 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *a 1.594,1.802 2.167,2.01 0.573,0.208 10 false B 2.229,1.802 2.792,2 0.563,0.198 10 false GND1 1.563,0.26 2.021,0.458 0.458,0.198 10 false K37
*a Component without harness connected
(NORMAL Mode Switch (Electric Parking Brake Switch Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K37-12 (B) - K37-9 (GND1) NORMAL mode switch (electric parking brake switch assembly) being pushed and held Below 1 Ω
NORMAL mode switch (electric parking brake switch assembly) not pushed 10 kΩ or higher


If the result is not as specified, replace the NORMAL mode switch (electric parking brake switch assembly).



c.

Inspect SPORT mode switch (electric parking brake switch assembly)

i.
C307484C44
1.479,0.219 1.906,0.469 0.427,0.25 1.625,1.427 1.5,1.771 true 2.396,1.781 2.219,1.417 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *a 1.458,1.813 2.031,2.021 0.573,0.208 10 false P 2.219,1.802 2.781,2 0.563,0.198 10 false GND1 1.563,0.26 2.021,0.458 0.458,0.198 10 false K37
*a Component without harness connected
(SPORT Mode Switch (Electric Parking Brake Switch Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K37-13 (P) - K37-9 (GND1) SPORT mode switch (electric parking brake switch assembly) being pushed and held Below 1 Ω
SPORT mode switch (electric parking brake switch assembly) not pushed 10 kΩ or higher


If the result is not as specified, replace the SPORT mode switch (electric parking brake switch assembly).