Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › SERVICE PLUG GRIP
RM33C0E _51 Engine / Hybrid System _065433 HYBRID / BATTERY CONTROL _0328998 SERVICE PLUG GRIP A

HYBRID / BATTERY CONTROL  SERVICE PLUG GRIP  INSTALLATION  


PROCEDURE

Hide G3834 1.INSTALL SERVICE PLUG GRIP

CAUTION:

Be sure to wear insulated gloves.


NOTICE:

Before installing the service plug grip, check that no parts or tools remain and that the high voltage terminals and connectors are connected securely.


a.

While wearing insulated gloves, and temporarily install the service plug grip as indicated by the arrow (1) shown in the illustration.

A406147N02
2.979,1.052 3.146,1.219 0.167,0.167 10 true 1 1.854,1.479 2.021,1.646 0.167,0.167 10 true 2 5.458,1.625 5.625,1.792 0.167,0.167 10 true 3


b.

Rotate the handle of the service plug grip 90° toward the HV battery and slide it in the direction indicated by the arrow (3) shown in the illustration until a click sound is heard to install the service plug grip.


Hide 58441E 2.INSTALL BATTERY SERVICE HOLE COVER

Hide 3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 64718C 4.INSTALL LUGGAGE TRIM SERVICE HOLE COVER