Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY BLOWER
RM33C0E _51 Engine / Hybrid System _065433 HYBRID / BATTERY CONTROL _0329000 BATTERY BLOWER A

HYBRID / BATTERY CONTROL  BATTERY BLOWER  INSTALLATION  


PROCEDURE

Hide G923B 1.INSTALL BATTERY COOLING BLOWER BRACKET

a.

Install the battery cooling blower bracket to the battery cooling blower assembly with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


b.

Engage the clamp.


Hide G9230 2.INSTALL BATTERY COOLING BLOWER ASSEMBLY

a.

Install the battery cooling blower assembly to the HV battery with the bolt and nut.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:
·

Be sure not to touch the fan part of the battery cooling blower assembly.

·

Do not lift the battery cooling blower assembly using the wire harness.




b.

Connect the battery cooling blower assembly connector.


Hide G92D1 3.INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

a.

Install the No. 1 hybrid battery intake duct to the battery cooling blower assembly with the 2 clips.


b.

Engage the 2 clamps.


Hide 71033 4.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

a.
A406072N01
2.104,1.802 2.26,2 0.156,0.198 10 true 1 2.563,1.802 2.719,2 0.156,0.198 10 true 2 3.01,0.208 3.167,0.406 0.156,0.198 10 true 3 1.167,1.802 1.323,2 0.156,0.198 10 true 4 0.688,1.802 0.844,2 0.156,0.198 10 true 5 0.26,0.208 0.417,0.406 0.156,0.198 10 true 6

Temporarily install the rear seat cushion leg sub-assembly with the 6 bolts.


b.

Fully tighten the 6 bolts in the order shown in the illustration.

Torque:
16 N*m (163 kgf*cm, 12 ft.*lbf)


Hide 76971G 5.INSTALL REAR UNDER COVER

a.

Engage the 2 clamps.


b.

Engage the 2 clips to install the rear under cover to the rear seat cushion leg sub-assembly.


Hide 76974F 6.INSTALL REAR UNDER SIDE COVER LH

a.

Engage the claw, 5 clips and guide.


b.

Install the rear under side cover LH with the 2 clips.


Hide 67918A 7.INSTALL REAR DOOR SCUFF PLATE LH

Hide 76973F 8.INSTALL REAR UNDER SIDE COVER RH

a.

Engage the claw, 5 clips and guide.


b.

Install the rear under side cover RH with the 2 clips.


Hide 67917A 9.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 72693 10.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 11.INSTALL REAR SEAT CUSHION ASSEMBLY

Hide 73350C 12.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY