Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY COOLING FILTER
RM33C0E _51 Engine / Hybrid System _065433 HYBRID / BATTERY CONTROL _0329001 BATTERY COOLING FILTER A

HYBRID / BATTERY CONTROL  BATTERY COOLING FILTER  REMOVAL  


PROCEDURE

Hide 58441E 1.REMOVE BATTERY SERVICE HOLE COVER

a.
A406159C02
0,0 0,0 false
V113147

Remove in this Direction


Remove the clip.


b.

Disengage the 7 claws as shown in the illustration.


c.
A406160C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the guide to remove the battery service hole cover as shown in the illustration.


Hide G92DH 2.REMOVE NO. 1 HV BATTERY INTAKE FILTER

HINT:

If the message "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, inspect the No. 1 HV battery intake filter.

Click hereGeneral>MAINTENANCE>BATTERY COOLING FILTER>INSPECTION


a.
A406161

Disengage the 3 claws.


b.
A406162C02
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 claws to remove the No. 1 HV battery intake filter from the battery service hole cover as shown in the illustration.