DESCRIPTION
The hybrid vehicle control ECU assembly controls the cruise control system of the vehicle. The data and DTCs related to the cruise control system can be read from the DLC3 of the vehicle. Use the GTS to check and solve the problem.
If a vehicle speed sensor, stop light switch assembly or any other related part malfunctions, the hybrid vehicle control ECU assembly cancels control of vehicle speed automatically.
CHECK DLC3
Check the DLC3.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION
CHECK INDICATOR
| *a | Cruise Control Indicator |
Turn the power switch on (IG).
Check that the cruise control indicator illuminates when the cruise control system is turned on using the cruise control main switch, and that the indicator turns off when the cruise control system is turned off using the cruise control main switch. If the results are not as specified, perform the Cruise Main Indicator Circuit inspection procedure.
Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>Cruise Main Indicator Light Circuit
While driving with the cruise control system controlling vehicle speed, the hybrid vehicle control ECU assembly will automatically cancel control of vehicle speed by the cruise control system when a malfunction occurs in one of the following: vehicle speed sensors, stop light switch assembly, or other related parts. When control of vehicle speed by the cruise control system is automatically canceled, the cruise control indicator turns off and a warning message is displayed. At the same time, a DTC is stored.