The hybrid vehicle control ECU assembly continuously monitors its main and sub CPUs. This self-check ensures that the hybrid vehicle control ECU assembly is functioning properly. If outputs from the CPUs are different and deviate from the standard, the hybrid vehicle control ECU assembly will illuminate the MIL and store the DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P160700 | Cruise Control Input Processor | When prohibited by the sub-CPU, the cruise control system operates for 0.3 seconds or more. | Hybrid vehicle control ECU assembly |
The hybrid vehicle control ECU assembly receives signals from each sensor to control all functions of the cruise control system. When a malfunction is detected, the fail-safe function operates until the power switch is turned off.
Clear the DTCs.
Perform the following procedure.
If the following procedure is not performed, the previously output DTC cannot be detected.
Turn the power switch on (IG).
Turn the cruise control system on using the cruise control main switch.
Wait for 1 second or more.
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTC P160700 is not output | A |
| DTC P160700 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B