Home › Power Source / Network › A25A-FXS (BATTERY / CHARGING) › CHARGING SYSTEM
RM33C0E _57 Power Source / Network _065427 A25A-FXS BATTERY / CHARGING _0329176 CHARGING SYSTEM U

A25A-FXS BATTERY / CHARGING  CHARGING SYSTEM  TERMINALS OF ECU  


C297329C24
1.385,0.083 1.802,0.333 0.417,0.25 4.188,0.083 4.604,0.333 0.417,0.25 2.708,0.083 3.125,0.333 0.417,0.25 5.458,0.083 5.875,0.333 0.417,0.25 1.469,0.125 1.927,0.323 0.458,0.198 10 false A28 2.781,0.115 3.24,0.313 0.458,0.198 10 false A29 4.271,0.125 4.729,0.323 0.458,0.198 10 false K69 5.552,0.125 6.01,0.323 0.458,0.198 10 false K70 0.115,0.083 0.427,0.24 0.313,0.156 10 false *a
*a Hybrid Vehicle Control ECU Assembly - -


HINT:

The standard normal voltage between each pair of hybrid vehicle control ECU assembly terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard normal voltage for that pair of terminals, displayed in the Specified Condition column. The illustration above can be used as a reference to identify the hybrid vehicle control ECU assembly terminal locations.


Hybrid Vehicle Control ECU
Terminal No. (Symbol) Wiring Color Input/Output Terminal Description Condition Specified Condition
A29-31 (HMCH) - K69-6 (E1) B - W-B IN/OUT CAN communication signal Power switch on (IG) Pulse generation
(Waveform 1)
A29-6 (MREL) - K69-6 (E1) G - W-B OUT IGCT relay Power switch on (IG) 11 to 14 V
A28-17 (LIN3) - K69-6 (E1) L - W-B IN/OUT LIN communication signal Power switch on (READY) Pulse generation
A29-30 (HMCL) - K69-6 (E1) W - W-B IN/OUT CAN communication signal Power switch on (IG) Pulse generation
(Waveform 1)

a.

Oscilloscope waveforms

HINT:

Oscilloscope waveform samples are provided here for informational purposes. Noise and fluttering waveforms have been omitted.


i.
A284438E06
2.969,1.198 3.427,1.396 0.458,0.198 10 GND 2.969,1.573 3.427,1.771 0.458,0.198 10 GND 0.396,0.646 0.854,0.844 0.458,0.198 10 CH1 0.396,1.229 0.854,1.427 0.458,0.198 10 CH2

Waveform 1 (CAN communication signal)

Item Content
Terminal CH1: A29-31 (HMCH) - K69-6 (E1)
CH2: A29-30 (HMCL) - K69-6 (E1)
Equipment Setting 1 V/DIV., 50 μs./DIV.
Condition Power switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).