DLC3 (Data Link Connector 3)
Check the DLC3.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION
AUXILIARY BATTERY VOLTAGE
| Switch Condition | Specified Condition |
|---|---|
| Power switch on (IG) | 11 to 14 V |
If voltage is below 11 V, recharge or replace the auxiliary battery.
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION