Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM › 2017.09–2021.02
RM33C0E _54 Brake _065446 PARKING BRAKE _0329402 ELECTRIC PARKING BRAKE SYSTEM J

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM  Message Not Displayed on Multi-information Display When AUTO Function Set to ON/OFF  


DESCRIPTION

When the AUTO function is set to ON/OFF, a message is displayed on the multi-information display in the combination meter assembly.

WIRING DIAGRAM

C381929E03
1.25,0.583 6.333,0.833 5.083,0.25 10 false Parking Brake ECU (Brake Actuator Assembly) 1.25,1 5.427,1.208 4.177,0.208 10 false - Multi-information Display Request Signal 1.25,2.583 3.823,2.802 2.573,0.219 10 false Combination Meter Assembly 1.25,3 5.49,3.156 4.24,0.156 10 false - Multi-information Display 0.844,4.188 3.771,4.531 2.927,0.344 10 false : CAN Communication Line

PROCEDURE

1.CHECK OPERATION OF AUTO FUNCTION
a.

Check that the AUTO function operates when the operating conditions are met.

HINT:

Do not use the multi-information display to determine whether the AUTO function is operating or not.



Result:
Result Proceed to
The AUTO function operates. A
The AUTO function does not operate. B



A

REPLACE COMBINATION METER ASSEMBLY

B

GO TO Electric Parking Brake System AUTO Function Circuit