46310B
1.INSPECT PARKING BRAKE ACTUATOR ASSEMBLY
Parking brake actuator assembly operation inspection
| *A | LH |
| *B | RH |
| *a | Component without harness connected
(Parking Brake Actuator Assembly) |
| *b | Lock |
| *c | Release |
Apply voltage to the terminals of the parking brake actuator assembly and check that it operates as specified.
| Tester Connection | Parking Brake Actuator Assembly Operation |
|---|---|
| Auxiliary battery positive (+) - v1-2 (LE+)
Auxiliary battery negative (-) - v1-1 (LE-) |
Lock |
| Auxiliary battery positive (+) - v1-1 (LE-)
Auxiliary battery negative (-) - v1-2 (LE+) |
Release |
| Tester Connection | Parking Brake Actuator Assembly Operation |
|---|---|
| Auxiliary battery positive (+) - u1-2 (RE+)
Auxiliary battery negative (-) - u1-1 (RE-) |
Lock |
| Auxiliary battery positive (+) - u1-1 (RE-)
Auxiliary battery negative (-) - u1-2 (RE+) |
Release |
If the result is not as specified, replace the parking brake actuator assembly.