The power steering ECU (rack and pinion power steering gear assembly) receives signals from the hybrid vehicle control ECU assembly, steering sensor, skid control ECU (brake booster with master cylinder assembly) and forward recognition camera via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Return-to-normal Condition | Note |
|---|---|---|---|---|---|---|
| U0126 | Lost Communication With Steering Angle Sensor Module | Lost communication with steering angle sensor | ·
CAN communication system ·
Steering angle sensor ·
Rack and pinion power steering gear assembly |
EPS warning light: Comes on | The ECU judges the system has returned to normal or the power switch is turned on (IG) again | - |
| U0129 | Lost Communication with Brake System Control Module | Lost communication with skid control ECU (Brake booster with master cylinder assembly) | ·
CAN communication system ·
Skid control ECU (Brake booster with master cylinder assembly) ·
Rack and pinion power steering gear assembly |
EPS warning light: Comes on | The ECU judges the system has returned to normal or the power switch is turned on (IG) again | - |
| U023A | Lost Communication with Front Camera Module | Lost communication with forward recognition camera | ·
CAN communication system ·
Forward recognition camera ·
Rack and pinion power steering gear assembly |
EPS warning light: Does not come on | The ECU judges the system has returned to normal or the power switch is turned on (IG) again | - |
| U0293 | Lost Communication with Hybrid Control Module | Lost communication with hybrid vehicle control ECU assembly | ·
CAN communication system ·
Hybrid vehicle control ECU assembly |
EPS warning light: Does not come on | The ECU judges the system has returned to normal or the power switch is turned on (IG) again | - |
Go to CAN communication system.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT