Home › Engine / Hybrid System › A25A-FXS (LUBRICATION) › ENGINE OIL COOLER
RM33C0E _51 Engine / Hybrid System _065425 A25A-FXS LUBRICATION _0329954 ENGINE OIL COOLER A

A25A-FXS LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

w/ Filter

i.

Install a new oil control valve filter to the cylinder block sub-assembly.



b.

Install 2 new oil cooler gaskets to the oil cooler assembly.


c.

Install the oil cooler assembly to the cylinder block sub-assembly with the 4 bolts.

Torque:
16 N*m (163 kgf*cm, 12 ft.*lbf)


d.

Connect the No. 1 water by-pass hose and No. 2 water by-pass hose to the oil cooler assembly, and slide the 2 clips to secure them.


Hide 3.ADD ENGINE COOLANT (for Engine)

Hide 5.INSPECT FOR OIL LEAK

Hide 6.INSPECT FOR COOLANT LEAK (for Engine)

Hide 7.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY (w/ Cover)

Hide 51441 8.INSTALL NO. 1 ENGINE UNDER COVER (w/ Cover)

Hide 53852K 9.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH (w/ Cover)

Hide 53851M 10.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH (w/ Cover)