CUSTOMIZE HEADUP DISPLAY SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Customize Setting / Display.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Projection Adjustment (Tilt) | Headup display image calibration (tilt calibration) | Default | $03:Clockwise (+3),$02:Clockwise (+2),$01:Clockwise (+1),$00:Default,$FF:Anti-Clockwise (-1),$FE:Anti-Clockwise (-2),$FD:Anti-Clockwise (-3) | Meter mirror sub-assembly |
| Projection Adjustment (Keystone) | Headup display image calibration (keystone calibration) | Default | $03:Narrow Top (+3),$02:Narrow Top (+2),$01:Narrow Top (+1),$00:Default,$FF:Narrow Bottom (-1),$FE:Narrow Bottom (-2),$FD:Narrow Bottom (-3) | Meter mirror sub-assembly |
| Projection Adjustment (Distortion) | Headup display image calibration (distortion calibration) | Default | $03:Convex (+3),$02:Convex (+2),$01:Convex (+1),$00:Default,$FF:Concave (-1),$FE:Concave (-2),$FD:Concave (-3) | Meter mirror sub-assembly |
| Audio Information Display Function | Audio information display setting for headup display* | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Master Caution Display Function | Master warning light display setting for headup display | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Speed Limit Display Function | Speed limit display setting for headup display* | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Turn by Turn Animation Function | Turn by turn animation setting for headup display* | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Traffic Sign Recognition Animation Function | Traffic sign recognition animation setting for headup display* | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Memory Call Link Function | Memory call link setting for headup display image position* | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Seat Switch Link Function | Power seat switch link setting for headup display image position | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
Depending on the specifications of the vehicle, some items may not be displayed.
*: Not applicable to this vehicle
Customizing with the multi-information display
Turn the power switch on (IG).
Select the setting tab and perform the customize setting from the multi-information display.
| Display | Detail | Description | Setting | ECU |
|---|---|---|---|---|
| HUD Brightness/Position | Brightness | Display brightness setting for headup display | - | Meter mirror sub-assembly |
| Position | Display position setting for headup display | - | Meter mirror sub-assembly | |
| HUD Driving Support | Tachometer Settings | Tachometer display setting for headup display | Blank/Eco Indicator/Tachometer | Meter mirror sub-assembly |
| Navigation | Route guidance to destination display setting for headup display | On/Off | Meter mirror sub-assembly | |
| Driving Assist | Driving assist display setting for headup display | On/Off | Meter mirror sub-assembly | |
| Compass | Compass display setting for headup display | On/Off | Meter mirror sub-assembly | |
| Rotation | - | Headup display image calibration (rotation calibration) | - | Meter mirror sub-assembly |
Depending on the specifications of the vehicle, some items may not be displayed.