81080J
1.INSPECT FOOTWELL LIGHT LH (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY)
| *a | Component without harness connected
(Footwell Light LH (No. 1 Interior Illumination Light Assembly)) |
Apply auxiliary battery voltage to the connector and check that the footwell light LH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 1 (E) |
Always | Footwell light LH comes on |
If the result is not as specified, replace the footwell light LH (No. 1 interior illumination light assembly).
81080J
2.INSPECT FOOTWELL LIGHT RH (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY)
| *a | Component without harness connected
(Footwell Light RH (No. 1 Interior Illumination Light Assembly)) |
Apply auxiliary battery voltage to the connector and check that the footwell light RH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 1 (E) |
Always | Footwell light RH comes on |
If the result is not as specified, replace the footwell light RH (No. 1 interior illumination light assembly).