813A0
1.INSPECT INSTRUMENT PANEL AMBIENT ILLUMINATION LIGHT (INSTRUMENT PANEL LIGHT ASSEMBLY)
| *a | Component without harness connected
(Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)) |
Apply auxiliary battery voltage to the connector and check that the instrument panel ambient illumination light comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 1 (E) |
Always | Instrument panel ambient illumination light comes on |
If the result is not as specified, replace the instrument panel ambient illumination light (instrument panel light assembly).