These DTCs are stored if a CAN communication malfunction occurs between the main body ECU (multiplex network body ECU) and other ECUs.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| U0100 | Lost Communication With ECM/PCM "A" | The main body ECU (multiplex network body ECU) does not receive data from the ECM for approximately 10 seconds or more. | ·
CAN communication system ·
ECM |
Main body ECU (multiplex network body ECU) |
| U0101 | Lost Communication with TCM | The main body ECU (multiplex network body ECU) does not receive data from the hybrid vehicle control ECU assembly for approximately 10 seconds or more. | ·
CAN communication system ·
Hybrid vehicle control ECU assembly |
Main body ECU (multiplex network body ECU) |
| U0120 | Lost Communication With Starter / Generator Control Module | The main body ECU (multiplex network body ECU) does not receive data from the certification ECU (smart key ECU assembly) for approximately 10 seconds or more. | ·
CAN communication system ·
Certification ECU (smart key ECU assembly) |
Main body ECU (multiplex network body ECU) |
| U0126 | Lost Communication with Steering Angle Sensor Module | The main body ECU (multiplex network body ECU) does not receive data from the steering sensor for approximately 10 seconds or more. | ·
CAN communication system ·
Steering sensor |
Main body ECU (multiplex network body ECU) |
| U0129 | Lost Communication with Brake System Control Module | The main body ECU (multiplex network body ECU) does not receive data from the skid control ECU (brake booster with master cylinder assembly) for approximately 10 seconds or more. | ·
CAN communication system ·
Skid control ECU (brake booster with master cylinder assembly) |
Main body ECU (multiplex network body ECU) |
| U0151 | Lost Communication with Restraints Control Module | The main body ECU (multiplex network body ECU) does not receive data from the airbag sensor assembly for approximately 10 seconds or more. | ·
CAN communication system ·
Airbag sensor assembly |
Main body ECU (multiplex network body ECU) |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | The main body ECU (multiplex network body ECU) does not receive data from the combination meter assembly for approximately 10 seconds or more. | ·
CAN communication system ·
Combination meter assembly |
Main body ECU (multiplex network body ECU) |
| U0163 | Lost Communication with Navigation Control Module | The main body ECU (multiplex network body ECU) does not receive data from the radio and display receiver assembly for approximately 10 seconds or more. | ·
CAN communication system ·
Radio and display receiver assembly |
Main body ECU (multiplex network body ECU) |
| U0164 | Lost Communication with HVAC Control Module | The main body ECU (multiplex network body ECU) does not receive data from the air conditioning amplifier assembly for approximately 10 seconds or more. | ·
CAN communication system ·
Air conditioning amplifier assembly |
Main body ECU (multiplex network body ECU) |
| U0182 | Lost Communication with AFS | The main body ECU (multiplex network body ECU) does not receive data from the headlight ECU sub-assembly LH for approximately 10 seconds or more. | ·
CAN communication system ·
Headlight ECU sub-assembly LH |
Main body ECU (multiplex network body ECU) |
| U0199 | Lost Communication with "Door Control Module A" | The main body ECU (multiplex network body ECU) does not receive data from the outer mirror control ECU assembly RH for approximately 10 seconds or more. | ·
CAN communication system ·
Outer mirror control ECU assembly RH |
Main body ECU (multiplex network body ECU) |
| U0200 | Lost Communication with "Door Control Module B" | The main body ECU (multiplex network body ECU) does not receive data from the outer mirror control ECU assembly LH for approximately 10 seconds or more. | ·
CAN communication system ·
Outer mirror control ECU assembly LH |
Main body ECU (multiplex network body ECU) |
| U0208 | Lost Communication with "Seat Control Module A" | The main body ECU (multiplex network body ECU) does not receive data from the position control ECU assembly (driver seat) for approximately 10 seconds or more. | ·
CAN communication system ·
Position control ECU assembly (driver seat) |
Main body ECU (multiplex network body ECU) |
| U023A | Lost Communication With Image Processing Module "A" | The main body ECU (multiplex network body ECU) does not receive data from the forward recognition camera for approximately 10 seconds or more. | ·
CAN communication system ·
Forward recognition camera |
Main body ECU (multiplex network body ECU) |
| U0293 | Lost Communication With Hybrid Powertrain Control Module | The main body ECU (multiplex network body ECU) does not receive data from the hybrid vehicle control ECU assembly for approximately 10 seconds or more. | ·
CAN communication system ·
Hybrid vehicle control ECU assembly |
Main body ECU (multiplex network body ECU) |
| U0327 | Software Incompatibility with Vehicle Security Control Module | The main body ECU (multiplex network body ECU) does not receive data from the certification ECU (smart key ECU assembly) for approximately 10 seconds or more. | ·
CAN communication system ·
Certification ECU (smart key ECU assembly) |
Main body ECU (multiplex network body ECU) |
| U1106 | Lost Communication with Electric Parking Brake Module | The main body ECU (multiplex network body ECU) does not receive data from the parking brake ECU (brake actuator assembly) for approximately 10 seconds or more. | ·
CAN communication system ·
Parking brake ECU (brake actuator assembly) |
Main body ECU (multiplex network body ECU) |
| U1115 | Lost Communication with Tilt & Telescopic Module | The main body ECU (multiplex network body ECU) does not receive data from the multiplex tilt and telescopic ECU for approximately 10 seconds or more. | ·
CAN communication system ·
Multiplex tilt and telescopic ECU |
Main body ECU (multiplex network body ECU) |
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Wait 20 seconds or more.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Check for DTCs.
DTCs are not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING