87834
1.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System)
|
Slide |
Disengage the 2 guides and slide the inner rear view mirror stay holder cover as shown in the illustration.
|
Remove in this Direction |
Disengage the 6 claws to remove the inner rear view mirror stay holder cover as shown in the illustration.
87810
2.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o Pre-collision System)
Disconnect the connector.
Using a T20 "TORX" socket wrench, remove the screw.
|
Remove in this Direction |
Slide the inner rear view mirror assembly as shown in the illustration to remove it.
86466E
3.REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)
86466D
4.REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
87810
5.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-collision System)
Disconnect the connector.
Disengage the clamp.
Using a T20 "TORX" socket wrench, remove the screw.
|
Remove in this Direction |
Slide the inner rear view mirror assembly as shown in the illustration to remove it.