Home › Vehicle Interior › POWER OUTLETS (INT) › WIRELESS CHARGING SYSTEM
RM33C0E _58 Vehicle Interior _065465 POWER OUTLETS (INT) _0331688 WIRELESS CHARGING SYSTEM U

POWER OUTLETS (INT)  WIRELESS CHARGING SYSTEM  TERMINALS OF ECU  


CHECK MOBILE WIRELESS CHARGER CRADLE ASSEMBLY (FRONT CONSOLE BOX INSERT SUB-ASSEMBLY)


E216115N15
3.417,0.167 3.75,0.417 0.333,0.25 3.51,0.188 3.854,0.354 0.344,0.167 10 false k1

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
k1-1 (PGND) - Body ground W-B - Body ground Ground Always Below 1 V
k1-5 (ACC) - k1-1 (PGND) P - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
Power switch off Below 1 V
k1-6 (B+) - k1-1 (PGND) G - W-B Power source (+B) Power switch off 11 to 14 V
k1-7 (DIS) - Body ground LG - Body ground Charging suspension signal For 5 seconds after turning power switch from off to on (ACC)*1 4.5 to 6.0 V
Device being charged Below 1 V
Charging suspended due to smart entry and start system status*2 4.5 to 6.0 V
k1-9 (ILL-) - Body ground L - Body ground Illumination (rheo stat) signal Light control switch in off position Below 1 V
Light control switch in tail or head position Pulse generation
k1-10 (TAIL) - Body ground W - Body ground Illumination signal Light control switch in off position Below 1 V
Power switch off, light control switch in tail or head position 11 to 14 V

*1: When the power switch is turned from off to on (ACC), the mobile wireless charger cradle assembly (front console box insert sub-assembly) monitors the charging suspension signal for 5 seconds. If the charging suspension signal is not 4 V or more for 0.8 seconds or more during monitoring, the mobile wireless charger cradle assembly (front console box insert sub-assembly) determines that there is an open in the charging suspension signal line, blinks (pattern 1) the indicator light (amber), and prohibits operation until the power switch is turned from off to on (ACC) again.

*2: For details about conditions when the certification ECU (smart key ECU assembly) sends the charging suspension signal, refer to System Description.

Click hereVehicle Interior>POWER OUTLETS (INT)>WIRELESS CHARGING SYSTEM>SYSTEM DESCRIPTION