87710G
1.INSTALL QUICK HEATER ASSEMBLY
|
Install in this Direction |
Install the quick heater assembly as shown in the illustration.
87114L
2.INSTALL NO. 2 HEATER COVER
Engage each guide and claw.
Install the No. 2 heater cover with the screw.
Engage the clamp.
Connect the 2 connectors.
87211
3.INSTALL NO. 1 AIR DUCT (for LHD)
for Manual Tilt and Manual Telescopic Steering Column:
for Power Tilt and Power Telescopic Steering Column:
87211
4.INSTALL NO. 1 AIR DUCT (for RHD)
for Manual Tilt and Manual Telescopic Steering Column:
for Power Tilt and Power Telescopic Steering Column:
55606
5.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY