Home › Vehicle Interior › HEATING / AIR CONDITIONING › AMBIENT TEMPERATURE SENSOR
RM33C0E _58 Vehicle Interior _065464 HEATING / AIR CONDITIONING _0331716 AMBIENT TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  AMBIENT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88790B 1.INSPECT THERMISTOR ASSEMBLY

B380459C20
0.229,0.135 0.344,0.135 0.344,0.135 0.375,0.396 false 1.49,2.99 1.667,2.75 1.667,2.75 1.917,2.75 false 1.906,0.188 2.219,0.344 0.313,0.156 10 false *a 0.063,0.063 0.375,0.219 0.313,0.156 10 false *b 0.104,2.813 0.417,2.969 0.313,0.156 10 false *c 1.844,4.458 2.156,4.615 0.313,0.156 10 false *d 1.938,2.667 2.25,2.823 0.313,0.156 10 false *e 0.5,4.188 0.823,4.417 0.323,0.229 10 false (50) 1.021,4.188 1.344,4.417 0.323,0.229 10 false (68) 1.552,4.188 1.875,4.417 0.323,0.229 10 false (86) 2.063,4.188 2.385,4.417 0.323,0.229 10 false (104) 2.594,4.198 2.917,4.427 0.323,0.229 10 false (122) 3.083,4.198 3.406,4.427 0.323,0.229 10 false (140)
*a Component without harness connected
(Thermistor Assembly)
*b Sensing Portion
*c Resistance (kΩ)
*d Temperature (°C (°F))
*e Allowable Range


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
15°C (59°F) 2.45 to 2.88 kΩ
20°C (68°F) 1.95 to 2.30 kΩ
25°C (77°F) 1.60 to 1.80 kΩ
30°C (86°F) 1.28 to 1.47 kΩ
35°C (95°F) 1.00 to 1.22 kΩ
40°C (104°F) 0.80 to 1.00 kΩ
45°C (113°F) 0.65 to 0.85 kΩ
50°C (122°F) 0.50 to 0.70 kΩ
55°C (131°F) 0.44 to 0.60 kΩ
60°C (140°F) 0.36 to 0.50 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensing portion may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (see the graph).


If the result is not as specified, replace the thermistor assembly.