GENERAL
The rear sunshade system has the following functions: manual operation, shift-linked operation and key-off operation.
FUNCTION OF MAIN COMPONENT
| Component | Outline |
|---|---|
| Rear window shade assembly | Uses the built-in rear sunshade relay to control the operation direction of the motor to raise or lower the rear window shade. |
·
Combination meter assembly ·
Rear sunshade switch (cooler control switch assembly)* |
Sends operation signals to the rear sunshade relay. |
*: w/ Cooler Control Switch Assembly
SYSTEM OPERATION
The rear sunshade system has the following features.
| Function | Outline |
|---|---|
| Manual operation | ·
Function that causes the rear window shade assembly to raise or lower when Open or Close is selected on the rear sunshade screen of the multi-information display. ·
Function that causes the rear window shade assembly to raise or lower when the rear sunshade switch (cooler control switch assembly) is touched.* |
| Shift-linked operation | Function that causes the rear window shade assembly to lower when the shift lever is moved to R with the rear window shade assembly raised.
When any of the following are performed, the rear window shade assembly is raised: ·
The shift lever is moved to P. ·
The shift lever is moved to D and vehicle speed reaches 15 km/h (9.3 mph) or more. ·
Power switch is turned off. |
| Key-off operation | Function that makes it possible to operate the rear window shade assembly for up to 72 seconds after the power switch is turned to on (ACC) or off. |
*: w/ Cooler Control Switch Assembly