Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM (w/ Steering Control) › 2017.09–2021.02
RM33C0E _51 Engine / Hybrid System _065434 CRUISE CONTROL _0331760 LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) C

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM(w/ Steering Control)  U0123  Lost Communication with Yaw Rate Sensor Module  U0126  Lost Communication with Steering Angle Sensor Module  U0129  Lost Communication with Brake System Control Module  U0131  Lost Communication with Power Steering Control Module  U0142  Lost Communication with Body Control Module "B"  U0155  Lost Communication with Instrument Panel Cluster (IPC) Control Module (Combination Meter)  U0293  Lost Communication with Hybrid Vehicle Control System  


DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0123 Lost Communication with Yaw Rate Sensor Module After the power switch is turned on (IG) for 3 seconds or more, when the vehicle is being driven at a speed of 5 km/h (4 mph) or more, a communication error between the yaw rate sensor (airbag sensor assembly) and forward recognition camera is detected for approximately 5 seconds or more.
·

CAN communication system

·

Yaw rate sensor (Airbag sensor assembly)

·

Forward recognition camera


U0126 Lost Communication with Steering Angle Sensor Module After the power switch is turned on (IG) for 3 seconds or more, a communication error between the steering sensor and forward recognition camera is detected for approximately 5 seconds or more.
·

CAN communication system

·

Steering sensor

·

Forward recognition camera


U0129 Lost Communication with Brake System Control Module After the power switch is turned on (IG) for 3 seconds or more, a communication error between the skid control ECU (brake booster with master cylinder assembly) and forward recognition camera is detected for approximately 5 seconds or more.
·

CAN communication system

·

Skid control ECU (Brake booster with master cylinder assembly)

·

Forward recognition camera


U0131 Lost Communication with Power Steering Control Module After the power switch is turned on (IG) for 3 seconds or more, when the vehicle is being driven at a speed of 5 km/h (4 mph) or more, a communication error between the power steering ECU (rack and pinion power steering gear assembly) and forward recognition camera is detected for approximately 5 seconds or more.
·

CAN communication system

·

Power steering ECU (Rack and pinion power steering gear assembly)

·

Forward recognition camera


U0142 Lost Communication with Body Control Module "B" After the power switch is turned on (IG) for 3 seconds or more, a communication error between the main body ECU (multiplex network body ECU) and forward recognition camera is detected for approximately 5 seconds or more.
·

CAN communication system

·

Main body ECU (Multiplex network body ECU)

·

Forward recognition camera


U0155 Lost Communication with Instrument Panel Cluster (IPC) Control Module (Combination Meter) After the power switch is turned on (IG) for 3 seconds or more, a communication error between the combination meter assembly and forward recognition camera is detected for approximately 50 seconds or more.
·

CAN communication system

·

Combination meter assembly

·

Forward recognition camera


U0293 Lost Communication with Hybrid Vehicle Control System After the power switch is turned on (IG) for 3 seconds or more, when the vehicle is being driven at a speed of 5 km/h (4 mph) or more, a communication error between the hybrid vehicle control ECU assembly and forward recognition camera is detected for approximately 5 seconds or more.
·

CAN communication system

·

Hybrid vehicle control ECU assembly

·

Forward recognition camera



PROCEDURE

1.CHECK FOR DTCs (LANE DEPARTURE ALERT SYSTEM)
a.

Clear the DTCs.

Chassis > LKA/LDA > Clear DTCs
50002 355

b.

Perform the following procedure.

HINT:

If the following procedure is not performed, the previously output DTC cannot be detected.

1.

Turn the power switch on (IG) and wait 1 minute or more.

2.

Drive the vehicle at a speed of 5 km/h (4 mph) or more for 5 seconds or more.




c.

Check for DTCs.

Chassis > LKA/LDA > Trouble Codes
50001 355

Result:
Result Proceed to
DTC U0123, U0126, U0129, U0131, U0142, U0155 and U0293 are not output A
DTC U0123, U0126, U0129, U0131, U0142, U0155 or U0293 is output B



A

B