Home › Steering › STEERING COLUMN › POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM › 2017.09–2020.08
RM33C0E _55 Steering _065448 STEERING COLUMN _0331813 POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM C

STEERING COLUMN  POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM  U014287  Lost Communication with Body Control Module "B" Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U020887  Lost Communication with "Seat Control Module A" Missing Message  


DESCRIPTION

The multiplex tilt and telescopic ECU receives signals from the main body ECU (multiplex network body ECU), combination meter assembly and position control ECU assembly (driver seat) via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area
U014287 Lost Communication with Body Control Module "B" Missing Message One of the following conditions is met:
·

Signals (memory-related data) from the main body ECU (multiplex network body ECU) are interrupted for 3.3 seconds.

·

Signals (IG switch signals) from the main body ECU (multiplex network body ECU) are interrupted for 10 seconds or more.


·

CAN communication system

·

Main body ECU (Multiplex network body ECU)


U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message Signals from the combination meter assembly are interrupted for 10 seconds or more.
·

CAN communication system

·

Combination meter assembly


U020887 Lost Communication with "Seat Control Module A" Missing Message Signals (memory or recall request signal) received from the position control ECU assembly (driver seat) are interrupted for 10 seconds or more.
·

CAN communication system

·

Position control ECU assembly (Driver seat)



PROCEDURE

1.GO TO CAN COMMUNICATION SYSTEM

Result:
Proceed to
NEXT



NEXT

END