OCCUPANT DETECTION ECU
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| a7-1 (SVC1) - a7-5 (SGD1) | R - G | Front occupant classification sensor LH power supply | Power switch on (IG) | 11 to 14 V |
| a7-2 (SVC3) - a7-6 (SGD3) | GR - W | Rear occupant classification sensor LH power supply | Power switch on (IG) | 11 to 14 V |
| a7-3 (SIG1) - a7-5 (SGD1) | P - G | Front occupant classification sensor LH signal | Power switch on (IG) | Pulse generation |
| a7-4 (SIG3) - a7-6 (SGD3) | SB - W | Rear occupant classification sensor LH signal | Power switch on (IG) | Pulse generation |
| a7-5 (SGD1) - a6-10 (GND) | G - W-B | Front occupant classification sensor LH ground | Always | Below 1 V |
| a7-6 (SGD3) - a6-10 (GND) | W - W-B | Rear occupant classification sensor LH ground | Always | Below 1 V |
| a6-4 (CANN) - a6-10 (GND) | SB - W-B | CAN communication line | Power switch on (IG) | Pulse generation |
| a6-5 (CANP) - a6-10 (GND) | R - W-B | CAN communication line | Power switch on (IG) | Pulse generation |
| a6-6 (IG2) - a6-10 (GND) | B - W-B | Power source | Power switch on (IG) | 11 to 14 V |
| a6-7 (BSW) - a6-9 (BGND) | G - P | Front passenger side buckle switch signal | Always | Pulse generation |
| a6-9 (BGND) - a6-10 (GND) | P - W-B | Front passenger side buckle switch ground | Always | Below 1 V |
| a6-10 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 V |