Be sure to correctly follow the removal and installation procedures for the rear seat airbag assemblies.
73940A
1.INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
Visually check for defects with the rear seat airbag assemblies installed to the vehicle.
The defects are as follows:
Scratches, broken or frayed threads on the surface of the rear side seatback assembly around the rear seat airbag assemblies
Small cracks in the rear side seatback assembly around the rear seat airbag assemblies
Significant discoloration on the rear side seatback assembly around the rear seat airbag assemblies
No defects are found.
If any defects are found, replace the rear side seatback pad or rear side seatback cover sub-assembly with a new one.
73940A
2.INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
Visually check for defects with the rear seat airbag assemblies removed from the vehicle.
The defects are as follows:
Scratches, broken or frayed threads on the surface of the base fabric of the rear seat airbag assemblies
Marks from being dropped
Deformation of the installation surface of the rear seat airbag assemblies
Cracks or other damage to the wire harness or connector
No defects are found.
If any defects are found, replace the rear seat airbag assembly with a new one.