If the hybrid vehicle control ECU assembly detects a malfunction in the hybrid control system or motor generator control system, it outputs a malfunction signal to the millimeter wave radar sensor assembly via CAN communication and DTC C1A63 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A63 | Other System Malfunction | With the power switch on (IG), the millimeter wave radar sensor assembly receives an accelerator pedal position sensor malfunction signal from the hybrid vehicle control ECU assembly for approximately 2 seconds or more. | ·
Hybrid control system ·
Motor generator control system |
If DTC C1A63 is output by the pre-collision system, perform troubleshooting for the hybrid control system and motor generator control system.
Motor generator control system: Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>MOTOR GENERATOR CONTROL SYSTEM (for NICKEL METAL HYDRIDE BATTERY)>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT