Home › Engine / Hybrid System › A25A-FXS (ENGINE CONTROL) › SFI SYSTEM (w/ Canister Pump Module)
RM33C0E _51 Engine / Hybrid System _065419 A25A-FXS ENGINE CONTROL _0332275 SFI SYSTEM(w/ Canister Pump Module) M

A25A-FXS ENGINE CONTROL  SFI SYSTEM(w/ Canister Pump Module)  REGISTRATION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 1. VIN (VEHICLE IDENTIFICATION NUMBER)

NOTICE:

The Vehicle Identification Number (VIN) must be written to a replacement ECM.


HINT:

The VIN is a 17-digit alphanumeric vehicle identification number. The GTS is required to register the VIN.


a.

DESCRIPTION

HINT:

This registration section consists of 2 parts: Read VIN and Write VIN.


i.

Read VIN: This procedure allows the VIN stored in the ECM to be read in order to confirm that the 2 VINs, provided with the vehicle and stored in the vehicle ECM, are the same.


ii.

Write VIN: This procedure allows the VIN to be written into the ECM. If the ECM is replaced, or the ECM VIN and vehicle VIN do not match, the VIN can be registered, or overwritten in the ECM by following this procedure.



b.

READ VIN

i.

Confirm the vehicle VIN.


ii.

Connect the GTS to the DLC3.


iii.

Turn the power switch on (IG).


iv.

Turn the GTS on.


v.

Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Read.

Powertrain > Engine > Utility
Tester Display
VIN
50005 372 2384

vi.

According to the display on the GTS, read the VIN stored in the ECM.



c.

WRITE VIN

i.

Confirm the vehicle VIN.


ii.

Connect the GTS to the DLC3.


iii.

Turn the power switch on (IG).


iv.

Turn the GTS on.


v.

Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Write.

Powertrain > Engine > Utility
Tester Display
VIN
50005 372 2384

vi.

According to the display on the GTS, write the VIN to the ECM.