Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM (w/o Occupant Classification System) › 2017.09–2021.02
RM33C0E _58 Vehicle Interior _065463 SEAT BELT _0332565 SEAT BELT WARNING SYSTEM(w/o Occupant Classification System) U

SEAT BELT  SEAT BELT WARNING SYSTEM(w/o Occupant Classification System)  TERMINALS OF ECU  


CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


B472410C10
1.125,3.25 1.563,3.5 0.438,0.25 3.156,3.219 3.594,3.469 0.438,0.25 5.448,3.208 5.885,3.458 0.438,0.25 1.698,4.573 2.135,4.823 0.438,0.25 5.302,6.396 5.74,6.646 0.438,0.25 1.104,6.167 1.542,6.417 0.438,0.25 3.667,6.125 4.104,6.375 0.438,0.25 5.302,6.083 5.74,6.333 0.438,0.25 6.313,6.198 6.75,6.448 0.438,0.25 3.365,7.646 3.802,7.896 0.438,0.25 5.385,4.615 5.823,4.865 0.438,0.25 1.656,1.208 1.958,1.208 false 1.667,1.552 1.969,1.552 false 1.667,1.875 1.969,1.875 false 4.042,0.792 4.042,0.313 4.042,0.313 4.229,0.313 false 0.531,2.49 0.531,2.323 0.531,2.323 0.865,2.323 false 3.469,7.677 3.781,7.875 0.313,0.198 10 false MB 4.292,0.219 4.604,0.417 0.313,0.198 10 false MB 2.042,1.135 2.354,1.333 0.313,0.198 10 false K51 2.052,1.479 2.365,1.677 0.313,0.198 10 false K52 2.052,1.802 2.365,2 0.313,0.198 10 false K53 0.875,1.073 1.188,1.271 0.313,0.198 10 false 3D 0.875,1.656 1.188,1.854 0.313,0.198 10 false 3C 0.885,2.021 1.198,2.219 0.313,0.198 10 false 3E 5.854,1.146 6.167,1.344 0.313,0.198 10 false 3B 5.854,1.76 6.167,1.958 0.313,0.198 10 false 3A 1.229,3.281 1.542,3.479 0.313,0.198 10 false K53 3.271,3.25 3.583,3.448 0.313,0.198 10 false K52 5.542,3.24 5.854,3.438 0.313,0.198 10 false K51 1.833,4.604 2.146,4.802 0.313,0.198 10 false 3A 1.24,6.198 1.552,6.396 0.313,0.198 10 false 3C 3.813,6.156 4.125,6.354 0.313,0.198 10 false 3D 5.427,6.115 5.74,6.313 0.313,0.198 10 false 3F 6.448,6.229 6.76,6.427 0.313,0.198 10 false 3E 5.521,4.646 5.833,4.844 0.313,0.198 10 false 3B 5.427,6.427 5.74,6.625 0.313,0.198 10 false 3G 5.813,6.125 6.125,6.323 0.313,0.198 10 false *A 5.823,6.427 6.135,6.625 0.313,0.198 10 false *B 0.365,2.531 0.76,2.76 0.396,0.229 10 false 3F*A 0.365,2.698 0.865,2.885 0.5,0.188 10 false 3G*B
*A for LHD *B for RHD


a.

Disconnect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


b.

Reconnect the instrument panel junction block assembly connectors.


c.

Measure the resistance and voltage according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
MB-31 (BECU) - Body ground - Auxiliary battery power supply Power switch off 11 to 14 V
MB-32 (IG) - Body ground - Ignition power supply (IG signal) Power switch on (IG) → off 11 to 14 V → Below 1 V
MB-30 (ACC) - Body ground - Ignition power supply (ACC signal) Power switch on (ACC) → off 11 to 14 V → Below 1 V
MB-11 (GND1) - Body ground - Ground Always Below 1 Ω
MB-18 (DBKL) - Body ground - Driver seat belt buckle switch signal Driver seat belt fastened 10 kΩ or higher
Driver seat belt unfastened Below 1 Ω
MB-2 (RCTY) - Body ground* - Rear door courtesy light switch RH input Rear door RH closed (OFF) 10 kΩ or higher
Rear door RH open (ON) Below 1 Ω
MB-13 (LCTY) - Body ground* - Rear door courtesy light switch LH input Rear door LH closed (OFF) 10 kΩ or higher
Rear door LH open (ON) Below 1 Ω

*: w/ Rear Seat Belt Warning




CHECK COMBINATION METER ASSEMBLY


B345456N13
3.427,0.208 3.813,0.427 0.385,0.219 3.5,0.229 3.813,0.427 0.313,0.198 10 false K21

a.

Disconnect the K21 combination meter assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K21-40 (B) - Body ground LA-B - Body ground Auxiliary battery power supply Power switch off 11 to 14 V
K21-39 (IG+) - Body ground LA-GR - Body ground Ignition power supply (IG signal) Power switch on (IG) → off 11 to 14 V → Below 1 V
K21-21 (ES) - Body ground W- B - Body ground Ground Always Below 1 Ω
K21-10 (PBKL) - Body ground*3 B*1, G*2 - Body ground Front passenger seat belt buckle switch signal Front passenger seat occupied, seat belt fastened 10 kΩ or higher
Front passenger seat occupied, seat belt unfastened Below 1 Ω
K21-11 (PODS) - Body ground*3 L - Body ground Occupant detection sensor signal Front passenger seat occupied Below 100 Ω
Front passenger seat not occupied 1 MΩ or higher
K21-24 (RLSB) - Body ground*4 SB - Body ground Rear LH seat belt buckle switch signal Rear LH seat belt fastened 10 kΩ or higher
Rear LH seat belt unfastened Below 1 Ω
K21-26 (RRSB) - Body ground*4 LG - Body ground Rear RH seat belt buckle switch signal Rear RH seat belt fastened 10 kΩ or higher
Rear RH seat belt unfastened Below 1 Ω
K21-25 (RCSB) - Body ground*4 B - Body ground Rear center seat belt buckle switch signal Rear center seat belt fastened 10 kΩ or higher
Rear center seat belt unfastened Below 1 Ω

*1: for LHD

*2: for RHD

*3: w/ Front Passenger Seat Belt Warning System

*4: w/ Rear Seat Belt Warning



c.

Reconnect the K21 combination meter assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K21-18 (RLMT) - Body ground* BE - Body ground Rear LH seat belt warning light output signal Power switch on (IG), rear seat belt warning light (LH) off 11 to 14 V
Power switch on (IG), rear seat belt warning light (LH) on Below 1 V
K21-19 (RCMT) - Body ground* R - Body ground Rear center seat belt warning light output signal Power switch on (IG), rear seat belt warning light (center) off 11 to 14 V
Power switch on (IG), rear seat belt warning light (center) on Below 1 V
K21-20 (RRMT) - Body ground* G - Body ground Rear RH seat belt warning light output signal Power switch on (IG), rear seat belt warning light (RH) off 11 to 14 V
Power switch on (IG), rear seat belt warning light (RH) on Below 1 V

*: w/ Rear Seat Belt Warning