73230
1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (w/ Rear Seat Belt Warning)
| *a | Component without harness connected
(Rear Seat Inner with Center Belt Assembly RH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 5 - 4 | Rear RH seat belt unfastened | Below 1 Ω |
| Rear RH seat belt fastened | 10 kΩ or higher |
If the result is not as specified, replace the rear seat inner with center belt assembly RH.