Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY
RM33C0E _58 Vehicle Interior _065463 SEAT BELT _0332573 REAR CENTER SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73350C 1.INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY

a.
B471745C01
2.573,1.375 2.833,0.833 2.833,0.833 2.354,0.604 false 2.854,0.688 3.167,0.885 0.313,0.198 10 false *a 0.438,0.885 0.75,1.083 0.313,0.198 10 false *b 1.375,2.75 1.688,2.948 0.313,0.198 10 false *c 0.75,1.865 1.063,2.063 0.313,0.198 10 false *d
*a Retractor
*b Unlock
*c Lock
*d 45°


Before installing the rear center seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the rear center seat outer belt assembly.