1.REMOVE FRONT WHEEL RH
53851M
2.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
Remove the 3 screws and front wheel opening extension pad RH.
53875A
3.REMOVE FRONT FENDER LINER RH
Remove the 6 screws.
| *a | Protective Tape |
Remove the clip.
Using a screwdriver, disengage the 2 claws.
Tape the screwdriver tip before use.
Remove the 11 clips and front fender liner RH.
4.DRAIN WASHER FLUID
Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
Use a container to collect the washer fluid.
85310
5.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
|
Remove in this Direction |
Disconnect the connector.
Remove the windshield washer motor and pump assembly as shown in the illustration.