Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR
RM33C0E _59 Vehicle Exterior _065471 WIPER / WASHER _0332910 WASHER MOTOR G

WIPER / WASHER  WASHER MOTOR  INSPECTION  


PROCEDURE

Hide 85310 1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

E287656C05
0.188,0.156 0.5,0.313 0.313,0.156 10 false *a
*a Component without harness connected
(Windshield Washer Motor and Pump Assembly)


a.

Remove the washer jar.


b.

Disconnect the windshield washer motor and pump assembly connector.

HINT:

This check should be performed with the windshield washer motor and pump assembly installed on the washer jar.



c.

Fill the washer jar with washer fluid.


d.

Connect an auxiliary battery positive (+) lead to terminal 1 of the windshield washer motor and pump assembly, and a negative (-) lead to terminal 2.


e.

Check that washer fluid flows from the washer jar.

OK:

Washer fluid flows from the washer jar.


If the result is not as specified, replace the windshield washer motor and pump assembly.