55435B
1.REMOVE NO. 1 METER HOOD CLUSTER
55434B
2.REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
85530
3.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the No. 1 power outlet socket assembly as shown in the illustration.
85535B
4.REMOVE NO. 1 POWER OUTLET SOCKET COVER
|
Remove in this Direction |
Disengage the 2 claws and remove the No. 1 power outlet socket cover as shown in the illustration.