Home › Vehicle Interior › SEAT › SEAT HEATER SYSTEM
RM33C0E _58 Vehicle Interior _065462 SEAT _0333601 SEAT HEATER SYSTEM C

SEAT  SEAT HEATER SYSTEM  B14B5  Lost Communication with Front Seat Temperature Adjustment Switch LIN  


DESCRIPTION

The refreshing seat switch communicates with the air conditioning amplifier assembly via LIN communication.

If the LIN communication system is malfunctioning, the air conditioning amplifier assembly will not operate even if the refreshing seat switch is operated.

DTC No. Detection Item DTC Detection Condition Trouble Area
B14B5 Lost Communication with Front Seat Temperature Adjustment Switch LIN Lost communication with the refreshing seat switch
·

Refreshing seat switch

·

Air conditioning amplifier assembly

·

Wire harness or connector

·

ECU-IG1 NO. 4 fuse



WIRING DIAGRAM

B343011E24
1.271,0.76 1.885,0.958 0.615,0.198 10 false LIN1 2.875,0.76 3.552,1.115 0.677,0.354 10 false SLIN 1.635,0.615 2.25,0.813 0.615,0.198 10 false 14 2.688,0.604 3.302,0.802 0.615,0.198 10 false 3 0.26,1.604 0.875,1.802 0.615,0.198 10 false K54 0.26,1.76 1.823,2.313 1.563,0.552 10 false Air Conditioning Amplifier Assembly 2.75,1.615 3.365,1.813 0.615,0.198 10 false K49 2.75,1.781 4.271,2.25 1.521,0.469 10 false Refreshing Seat Switch 3.875,1.167 4.49,1.365 0.615,0.198 10 false E 4.073,1.073 4.688,1.271 0.615,0.198 10 false 5 3.833,0.365 4.448,0.563 0.615,0.198 10 false IG 4.083,0.26 4.698,0.458 0.615,0.198 10 false 1 4.448,0.531 5.448,0.802 1,0.271 10 false ECU-IG1 NO. 4 5.688,0.365 7.104,0.635 1.417,0.271 10 false from IG1-NO. 1 Relay 0.781,2.448 2.563,2.729 1.781,0.281 10 false : LIN Communication Line

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.


PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Air Conditioner > Clear DTCs
50002 121

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
OK:

DTC B14B5 is not output.



Result:
Proceed to
OK
NG



OK

NG

3.CHECK HARNESS AND CONNECTOR (IG POWER SUPPLY - REFRESHING SEAT SWITCH - BODY GROUND)
3.CHECK HARNESS AND CONNECTOR (IG POWER SUPPLY - REFRESHING SEAT SWITCH - BODY GROUND)
a.
B454543C03
1.5,0.25 1.917,0.5 0.417,0.25 0.948,1 1.375,1 1.375,1 1.375,1.167 true 2.448,1 2.042,1 2.042,1 2.042,1.167 true 1.583,0.302 2.042,0.5 0.458,0.198 10 false K49 2.5,0.917 2.656,1.115 0.156,0.198 10 false E 0.781,0.917 1.094,1.115 0.313,0.198 10 false IG 0.104,0.135 0.417,0.333 0.313,0.198 10 false *a
*a Front view of wire harness connector
(to Refreshing Seat Switch)


Disconnect the K49 refreshing seat switch connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
K49-1 (IG) - Body ground Power switch on (IG) 11 to 14 V
K49-1 (IG) - Body ground Power switch off Below 1 V


Standard Resistance:
Tester Connection Condition Specified Condition
K49-5 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - REFRESHING SEAT SWITCH)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - REFRESHING SEAT SWITCH)
a.

Disconnect the K54 air conditioning amplifier assembly connector.


b.

Disconnect the K49 refreshing seat switch connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K54-14 (LIN1) - K49-3 (SLIN) Always Below 1 Ω
K54-14 (LIN1) or K49-3 (SLIN) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.REPLACE REFRESHING SEAT SWITCH

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.REPLACE REFRESHING SEAT SWITCH
a.

Temporarily replace the refreshing seat switch with a new or known good one.

Click hereVehicle Interior>SEAT>SEAT HEATER SWITCH>REMOVAL


Result:
Proceed to
NEXT



NEXT

6.CLEAR DTC
6.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Air Conditioner > Clear DTCs
50002 121

Result:
Proceed to
NEXT



NEXT

7.CHECK FOR DTC
7.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Air Conditioner > Trouble Codes
50001 121
OK:

DTC B14B5 is not output.



Result:
Proceed to
OK
NG



OK

END (REFRESHING SEAT SWITCH WAS DEFECTIVE)

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY