Wear protective gloves. Sharp areas on the parts may injure your hands.
71075B
1.INSTALL BENCH TYPE REAR SEAT CUSHION COVER
When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION
Engage the 24 claws.
Be careful not to damage the bench type rear seat cushion cover.
Engage the 12 hooks.
Be careful not to damage the bench type rear seat cushion cover.
Using hog ring pliers, install 6 new hog rings.
Be careful not to damage the bench type rear seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.
Using hog ring pliers, install 2 new hog rings.
Be careful not to damage the bench type rear seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.
Using hog ring pliers, install 6 new hog rings.
Be careful not to damage the bench type rear seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.
Engage the 7 hooks.
Be careful not to damage the bench type rear seat cushion cover.
Engage the 4 fasteners to install the bench type rear seat cushion cover to the rear seat cushion pad sub-assembly.
|
Fastener | - | - |
Be careful not to damage the bench type rear seat cushion cover.
73733
2.INSTALL CHILD RESTRAINT SEAT BASE COVER
|
Install in this Direction |
Engage the guide and claw as shown in the illustration.
Install the child restraint seat base cover with the screw.
Use the same procedure for all child restraint seat base cover.
73731
3.INSTALL CHILD RESTRAINT SEAT COVER
|
Install in this Direction |
Engage the 2 guides and 2 claws to install the child restraint seat cover as shown in the illustration.
Use the same procedure for all child restraint seat covers.
71078S
4.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION
w/o Removable Headrest:
Engage the 6 claws to install the separate type rear seatback cover to the separate type rear seatback pad.
Be careful not to damage the separate type rear seatback cover.
w/ Removable Headrest:
Engage the 5 claws to install the separate type rear seatback cover to the separate type rear seatback pad.
Be careful not to damage the separate type rear seatback cover.
71931A
5.INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)
w/ Removable Headrest:
|
Install in this Direction |
Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.
6.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
|
Install in this Direction |
Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH as shown in the illustration.
Engage the 4 hooks.
| *a | Fastener |
Close the 2 fasteners as shown in the illustration.
72667
7.INSTALL REAR SEATBACK UPPER LOCK BEZEL (for LH Side)
Engage the 4 claws to install a new rear seatback upper lock bezel.
71077S
8.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION
w/o Removable Headrest:
Engage the 6 claws.
Be careful not to damage the separate type rear seatback cover.
w/ Removable Headrest:
Engage the 5 claws.
Be careful not to damage the separate type rear seatback cover.
Engage the 6 guides to install the separate type rear seatback cover to the separate type rear seatback pad.
Be careful not to damage the separate type rear seatback cover.
71931A
9.INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)
w/ Removable Headrest:
|
Install in this Direction |
Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.
10.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
|
Install in this Direction |
Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH as shown in the illustration.
Engage the 6 hooks.
| *a | Fastener |
Close the 2 fasteners as shown in the illustration.
72667
11.INSTALL REAR SEATBACK UPPER LOCK BEZEL (for RH Side)
Engage the 4 claws to install a new rear seatback upper lock bezel.
73345
12.INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)
Engage the guide.
Install the rear seat center shoulder belt guide with the 2 screws.
72087A
13.INSTALL REAR SEAT CENTER ARMREST COVER SUB-ASSEMBLY (for RH Side)
When installing a rear seat center armrest cover sub-assembly, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION
| *a | Fastener |
Install the rear seat center armrest cover sub-assembly to the rear seat center armrest pad sub-assembly and close the fastener as shown in the illustration.
Be careful not to damage the rear seat center armrest cover sub-assembly.
72806D
14.INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for RH Side)
for Type A:
Install the 2 screws and rear seat center armrest cup holder sub-assembly.
for Type B:
|
Install in this Direction |
Engage the 2 guides as shown in the illustration.
|
Install in this Direction |
Engage the 2 claws to install the rear seat center armrest cup holder sub-assembly as shown in the illustration.
72987
15.INSTALL REAR SEAT CENTER ARMREST COVER (for RH Side)
for Type A:
Install the rear seat center armrest cover.
72860
16.INSTALL REAR SEAT CENTER ARMREST BOX ASSEMBLY (for RH Side)
for Type A:
Engage the 4 claws to install the rear seat center armrest box assembly.
72830
17.INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)
|
Install in this Direction |
Install the bush as shown in the illustration.
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the pin and temporarily install the rear seat center armrest assembly as shown in the illustration.
Install the rear seat center armrest assembly with the bush and bolt.
71349C
18.INSTALL REAR SEATBACK HINGE COVER (for RH Side)
|
Install in this Direction |
Engage the pin.
Engage the 2 claws to install the rear seatback hinge cover as shown in the illustration.
71089A
19.INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)
Install the rear side seatback cover sub-assembly LH to the rear side seatback pad LH.
73940A
20.INSTALL REAR SEAT AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag)
21.INSTALL REAR SIDE SEATBACK COVER WITH PAD (for LH Side)
|
Install in this Direction |
Install the rear side seatback cover with pad to the rear side seatback frame sub-assembly LH as shown in the illustration.
Engage the 15 hooks.
w/ Rear Seat Side Airbag:
Install the 2 nuts.
73344
22.INSTALL REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)
Engage the guide.
Install the rear seat shoulder belt guide LH with the 2 screws.
71088A
23.INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)
Use the same procedure as for the LH side.
73930A
24.INSTALL REAR SEAT AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag)
Use the same procedure as for the LH side.
25.INSTALL REAR SIDE SEATBACK COVER WITH PAD (for RH Side)
Use the same procedure as for the LH side.
73343
26.INSTALL REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)
Use the same procedure as for the LH side.