Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH › 2017.09–2018.04
RM33C0E _58 Vehicle Interior _065462 SEAT _0333607 SEAT MEMORY SWITCH G

SEAT  SEAT MEMORY SWITCH  INSPECTION  


PROCEDURE

Hide 84927 1.INSPECT SEAT MEMORY SWITCH (DRIVER DOOR)

a.
B480088C01
1.885,0.771 1.885,0.271 true 1.313,0.771 1.313,0.271 true 2.448,0.771 2.448,0.271 true 1.208,0.104 1.521,0.26 0.313,0.156 10 false *a 1.813,0.104 2.125,0.26 0.313,0.156 10 false *b 2.365,0.094 2.729,0.313 0.365,0.219 10 false *c 0.26,1.906 0.563,2.156 0.302,0.25 10 false *d
*a SET Switch
*b M1 Switch
*c M2 Switch
*d Component without harness connected
(Seat Memory Switch (Driver Door))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the seat memory switch (driver door).

2 - 1 M1 switch pressed Below 1 Ω
M1 switch not pressed 10 kΩ or higher
5 - 1 M2 switch pressed Below 1 Ω
M2 switch not pressed 10 kΩ or higher
3 - 1 SET switch pressed Below 1 Ω
SET switch not pressed 10 kΩ or higher